ABB GWT C9, Product Manual

Page: 110 / 128

Note Action
xx2000002716
Tighten the screws and nuts (pos. 1) al-
ternately to evenly distribute the force
over the clamping connection.
Note
If both electrode holders are loose or in
the wrong position, a repositioning must
be done according to the main assembly
drawing. Measure the position of the
electrode holders and make sure that it
matches the values in the main assembly
drawing. TCP check is required.
29
See Remove/reassemble the protective
cover on page 79 .
Reassemble the protective cover. 30
110 Product manual - GWT C9
3HAA010198-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
5 Repair
5.8 Replacement of the welding gun arm
Continued