ABB Switzerland Ltd
1KHW001489-EN
ETL600
(maximum 14 when 7 modules G4AI are plugged).
•
Each TPE can only use inputs and outputs of its
own teleprotection Interface(s).
5.3.2. Configure
System
Point to
Configuration
/
System
to get a dialog box with the 4 tabs
Equipment settings
,
Channel settings
,
Alarm settings
and
Alarm
relays on R1BC
.
5.3.2.1. Equipment
Settings
Remarks for tab
Equipment settings:
•
All data entered into the fields
Link No.
,
Equipment name
,
Cabinet No.
,
Equipment No.
,
Equipment type
are interpreted as
character strings.
•
In the field
Equipment address
a number between
0
and
65000
must be entered. The default value of
0
can be used as long as
just one single link is accessible from HMI600. However, if several
links are connected to a network whose elements are to be
managed from one single HMI600, unique
Equipment address
es
have to be assigned to all terminals prior to connecting them to the
network, so that the terminals can be addressed individually by
HMI600. Refer to section
4.5
for more details.
•
The default value for the HMI datarate in the ETL600 is 57600 bps.
If this rate is changed, it must be changed accordingly in the
HMI600 under
Options / Communications
.
•
The 3 frames on the right side named
Assemblies in upper rack
P7LA
,
Assemblies in lower rack P7LA
and
Assemblies in rack
P7LC
are intended to record the presence of those modules in the
ETL600 racks which otherwise would not be recorded by HMI600.
5.3.3. Configure
NSD600
Point to
Configuration
/
NSD600
to get a dialog box with the tabs
TPE 1
,
TPE 2
,
Supervision TPE
1
,
Supervision TPE
2
and
G4AI N71
.
Additional tabs
G4AI N11
,
G4AI N22
,
G4AI N28
,
G4AI N34
,
G4AI N54
and
G4AI N65
can be present depending on the required number of
NSD600 ports entered previously under
Configure services
.
Remarks for the tabs
TPE 1 / TPE 2:
•
Each of the four commands A, B, C, D can be set under
Application
to
off
,
blocking
,
permissive
,
direct
.
Note:
It is recommended to configure the commands A to D
in ascending order regarding security requirements
of the application (example: command A for blocking,
B and C for permissive, D for direct tripping).
5-16
November 2005
Configuration and Set-up
Summary of Contents for ETL600
