![background image](http://html.mh-extra.com/html/abb/ec-titanium-ecs100a1h1df4/ec-titanium-ecs100a1h1df4_manual_3515013.webp)
General Information and Ratings 2-3
MN448
2.2.3 Drive Nameplate and Type Designation Label
For Axial and Top Mounted integrated drive and motor units, two drive labels are included to allow identification for IEC and
NEMA ratings. The drive type designation label is located on the side of the drive module under the cover. A second Drive
Label is located on the outside of the drive enclosure.
Figure 2-3 Enclosure Drive Label
ECI4A4P1
280-480V
48...62
4.5 A
5.6 A
62340001007
3
Figure 2-4 Interior Drive Module Label
PN
1.5kW ( 2HP)
U1
3 ~ 280-480V
I1
5.6 A
I1
with ext. choke
4.5A
f1
48...62Hz
U2
3 ~ 0-500 V
I2
4.2 A (150% 1/5 min)
F2
0-500Hz
IP20 /
UL Open type
ECI4A4P1
910161
Power down for
5 mins before
removing
cover
AC Variable Speed Motors
ABB Motor and Mechanical Inc.
Fort Smtih, AR
Caution
1
2
3
4
5
6
Read User
guide before
installation
or servicing
Region Description
1
Drive Module, see ratings table
on page xxx
2
Degree of protection by
enclosure (IP and UL/NEMA)
3
Nominal ratings, see ratings
table on page xxx
4
ABB MRP code of the drive
5
Drive Date Code*
6
CE marking
*Note: Drive 6 Digit date code, read backwards for example, the number 910161 means 16 January 2019
2.2.4 Motor and Drive Nameplate Locations
Region
Description
1
2
3
1
Figure 2.2 Motor Nameplate
2
Figure 2.3 Drive Enclosure
Nameplate
3
Figure 2.4 Drive Module
Nameplate (see Section 3.5
removing drive cover)
Summary of Contents for EC Titanium ECS100A1H1DF4
