ABB DSQC1016, Manual

Page: 144 / 156

7.8 Key switch kit installation
Introduction
There is a key switch kit which could be installed close to the Connected Services
box to enable or disable Remote Access locally. The kit is designed for installation
in the IRC5 cabinet but could be adapted manually to other cabinets depending
on the location of the box with different wire length. For more details, see
Connecting service box input/output on page 119 .
It is possible to order the key switch kit through BOL (Business On Line) under the
reference 3HAC060851-001.
Connector description
300 ±5
Connection table
Connection point A Connection point B
Item des. Term. Type Ref. Item des. Term. Type Ref. Rem.
A61.X1 5 3 i1 S61.24 Free end 3 24V
A61.X1 7 3 + S61.23 Free end 3 24V
A61.X1 4 3 i- A61.X1 8 3 - 0V
en1600001701
The connector A61.X1 is replacing the existing power connector plugged in the
service box. The existing power cables need to be transferred from the existing
plug and wired to the connector A61.X1 on terminal 8 for GND (or 0V), terminal 7
for +24 V, and terminal 9 for Earth connection.
Continues on next page
144 Product manual - Connected Services
3HAC060439-001 Revision: E
© Copyright 2019 ABB. All rights reserved.
7 Remote Access
7.8 Key switch kit installation