ABB DSQC1016, Manual

Page: 68 / 156

Connecting the Network Service Box to the local network and Internet
The Network Service Box is connected to an Internet Gateway through its external
WAN port. The connection can be either through ADSL/3G modem or internal router
and/or proxy. The Network Service Box is configured to use the external WAN port
instead of the internal GPRS connection. The WAN port can be defined with static
or DCHP IP address. The access to Internet can be configured to be direct or via
a proxy authenticated or not. The supported proxy authentications are Basic or
NTLM.
Note
The connection is secured using HTTPS (port 443) to initiate an outbound
connection and to create a secured VPN tunnel to the ABB server.
The Network Service Box connects the outbound to the following Connection
Service addresses:
• Firmware >= 0200
- as.pro.talk2m.com (92.52.111.210) to initiate and certify the connection.
- device.vpnX.talk2m.com (X = 1-10) for tunnel connections.
If a firewall is used on the local network, HTTPS port and the ABB Service
addresses should be reachable.
Quick set up of Network Service Box
Use this procedure for quick set up of Network Service Box.
Note Action
Connect the WAN port of the Network Service Box
to the internet gateway. 1
Connect a PC (IP: 192.168.125.84) to the external
service port of the controller. 2
Open http://192.168.125.83 . 3
For more information about set-
ting up the user, see
Configuring
the user on page 59 .
Type config as both user login and password. 4
For more information about set-
ting up the WAN port, see
Config-
uring WAN Port using 3G on
page 63
.
Click Configuration Menu and select WAN Setup . 5
For more information about the
status of VPN connection, see
Verifying Network Connection on
page 72
.
Click Configuration Menu and select ABB VPN
Status .
6
The LED of the Modem turns
green. Verify that the connection to the ABB server is cor-
rect. 7
Configuring WAN Port using Internet
Note Action
Open http://192.168.125.83 . 1
Continues on next page
68 Product manual - Connected Services
3HAC060439-001 Revision: E
© Copyright 2019 ABB. All rights reserved.
4 Service Box configuration
4.3.1 Set up Network Service Box for Connected Services
Continued