ABB DSQC1016, Manual

Page: 95 / 156

Description Caption
Service Box (3G) : The status code should be 1 or 5 to have a suc-
cessful connection established.
Modem status code
Possible values:
• 1: Home network
• 2: Searching registration
• 3: Registration denied
• 4: unknown registration
• 5: Roaming
• 100: Not applicable
• 101: Registration in progress
• other: error connection
Network Service Box : Modem Disabled
Service Box (3G) :The modem error state.
• 0 means no error
• other: modem error
Network Service Box : Not Available (N/A)
Modem error code
Service Box (3G)
• 0: Auto Detection
• other: contact ABB
Network Service Box : Not Available (N/A)
Modem band
Service Box (3G) : List of available mobile operators (international
code number).
Detected operator
Network Service Box : Not Available (N/A)
List of connected ports.
• 0 means connection of the switch to the service box (should
always be on)
• 1 means live ethernet connection with LAN1
• 2 means live ethernet connection with LAN2
• 3 means live ethernet connection with LAN3
• 4 means live ethernet connection with WAN4
Port connected
Service Box (3G) : Type of SIM code.
• 234: TMobile Sim
• 272: O2 Sim
• other: other sim
Network Service Box : Not Available (N/A)
Sim code
Signal
Verify that both GSM and 3G communication are possible.
To improve signal quality, the following options are available via PoL:
Note Description Part no.
This antenna is larger than the standard Control-
ler top mounted antenna and has a mounting
bracket. The antenna has a better reception and
can be wall mounted at any convenient indoor
upright position Omni-directional an-
tenna (ADA-0059) 3HAC028460-001
In case the GPRS reception with the standard
antenna is insufficient. Available are 10 meter
extension cables for antennas mounted at larger
distance from the Controller. A maximum of two
extension cables are recommended (a total
length of 20 meters) Cable extension (10
m) 3HAC028462-001
Continues on next page
Product manual - Connected Services 95
3HAC060439-001 Revision: E
© Copyright 2019 ABB. All rights reserved.
6 Troubleshooting
6.1 Troubleshooting with the Connected Services Kit installation
Continued