ABB DSQC1016, Manual

Page: 13 / 156

2 Introduction to the Connected Services Kit
2.1 Introduction
Overview
This section describes the purpose of the Connected Services Kit and the platform
on which to install it.
Target platform
The target platform for installing the Connected Services Kit is the robot controllers
IRC5P, IRC5 Single, and Dual Cabinet.
Concept
The Connected Services Kit acts as a bridge between the robot controller and the
Remote server. The Service box and Remote server communicates over the internet
either through wireless 3G/ WiFi technology or through an external WAN port. The
information from the robot is buffered, parsed, and filtered through the ethernet
port to obtain valuable service information in the connected services application.
The following illustration provides an overview of the Connected Services with the
Service Box.
en1600001430
Continues on next page
Product manual - Connected Services 13
3HAC060439-001 Revision: E
© Copyright 2019 ABB. All rights reserved.
2 Introduction to the Connected Services Kit
2.1 Introduction