ABB DSQC1016 Manual Download Page 149

Page: 149 / 156

8.3 Configuring a Service Box as Gateway

Overview

This section describes how to create Service Box as Gateway in WebConfig.

The Service Box configured as a Gateway is described in

Service Box configuration

on page 57

. In case the Service Box is used as a Gateway, the IP address of the

box can also be changed to match the connection to the Controllers WAN Port,
see

Configuring the Local Connectivity configuration on page 61

Defining a Service Box as Gateway in Service Agreement

Use this procedure to create Service Box as Gateway in WebConfig.

Note

For a Service Box to be used as a gateway, it must be defined in a Service
Agreement.

1 Go to

Production

Agreements

home page > Click

Create SB Gateway

from the left menu.

en1600002025

2 Enter Service box serial number, select the Service Box type and search for

the Customer to which the Gateway Service Box is adding and click

Create

button.

en1600002026

Continues on next page

Product manual - Connected Services

149

3HAC060439-001 Revision: E

8 Service Box used as Gateway

8.3 Configuring a Service Box as Gateway

Summary of Contents for DSQC1016




























































































































































Search results

Summary of Contents for DSQC1016

Reviews:

Related manuals for DSQC1016

Brands by name

Popular brands

ABB DSQC1016, Manual

Search results

Summary of Contents for DSQC1016

Reviews:

Related manuals for DSQC1016

Brands by name

Popular brands