ABB ACS880-04F, Hardware Manual, Page: 133 / 172

Technical data 133
Vibration
IEC 60068-2-6:2007,
EN 60068-2-6:2008
Environmental testing Part 2:
Tests –Test Fc: Vibration
(sinusoidal)
Max. 0.1 mm (0.004 in.)
(10 to 57 Hz),
max. 10 m/s
2
(33 ft/s
2
)
(57 to 150 Hz) sinusoidal
Max. 1 mm (0.04 in.)
(5 to 13.2 Hz),
max. 7 m/s
2
(23 ft/s
2
)
(13.2 to 100 Hz)
sinusoidal
Max. 3.5 mm (0.14 in.)
(2 to 9 Hz),
max. 15 m/s
2
(49 ft/s
2
)
(9 to 200 Hz) sinusoidal
Shock
IEC 60068-2-27:2008,
EN 60068-2-27:2009
Environmental testing - Part 2-
27: Tests - Test Ea and
guidance: Shock
Not allowed With packing max.
100 m/s
2
(330 ft./s
2
),
11 ms
With packing max.
100 m/s
2
(330 ft./s
2
),
11 ms
Free fall Not allowed 100 mm (4 in.) for weight
over 100 kg (220 lb) 100 mm (4 in.) for weight
over 100 kg (220 lb)
Materials
Drive enclosure • PC/ABS 2.5 mm (0.098 in.), color NCS 1502-Y (RAL 9002 / PMS 420 C)
• hot-dip zinc coated steel sheet 1.5 to 2.5 mm (0.059 to 0.098 in.), thickness
of coating 100 micrometers, color NCS 1502-Y
Package Plywood and cardboard, bands PP.
Disposal The main parts of the drive can be recycled to preserve natural resources and
energy. Product parts and materials should be dismantled and separated.
Generally all metals, such as steel, aluminum, copper and its alloys, and
precious metals can be recycled as material. Plastics, rubber, cardboard and
other packaging material can be used in energy recovery. Printed circuit
boards and DC capacitors (C1-1 to C1-x) need selective treatment according
to IEC 62635 guidelines. To aid recycling, plastic parts are marked with an
appropriate identification code.
Contact your local ABB distributor for further information on environmental
aspects and recycling instructions for professional recyclers. End of life
treatment must follow international and local regulations.
Applicable standards
The drive complies with the following standards.
EN 61800-5-1:2007 Adjustable speed electrical power drive systems. Part 5-1: Safety
requirements – electrical, thermal and energy
EN 60204-1:2006 + A1:2010 Safety of machinery. Electrical equipment of machines. Part 1: General
requirements
. Provisions for compliance: The final assembler of the machine
is responsible for installing
- emergency-stop device
- supply disconnecting device
- IP00 drive module into a cabinet.
IEC/EN 60529:1991 +
A2:2013 Degrees of protection provided by enclosures (IP code)
3AXD50000040437_assy