ABB ACS180, Hardware Manual, Page: 22 / 168

See Task
Type designation key (page 32)
Identify the frame size: R0, R1, R2, R3 or R4.
Guidelines for planning the electrical
installation (page 43)
Technical data (page 91)
Plan the installation.
Check the ambient conditions, ratings and required
cooling air flow.
Unpacking the delivery (page 38)
Unpack and check the drive.
Earthing system compatibility
check (page 61)
If the drive will be connected to an IT (ungrounded)
system, make sure that the internal EMC filter is not
connected.
Installing the drive (page 40)
Install the drive mechanically.
Routing the cables (page 50)
Route the cables.
Connecting the power
cables (page 65)
Connect the power cables.
Connecting the control
cables (page 68)
Connect the control cables.
Installation checklist (page 77)
Examine the installation.
Refer to the
ACS180 Quick installa-
tion and start-up guide
(3AXD50000510344 [English]) and
the
ACS180 Firmware manual
(3AXD50000467860 [English]).
Commission the drive.
22 Introduction to the manual