ABB ACS180, Hardware Manual, Page: 40 / 168

Installing the drive
You can install the drive:
• With screws to a suitable surface (wall or assembly plate).
• To a DIN installation rail with the integrated lock for frame sizes R3 and R4.
￭ To install the drive with screws
1. Make marks onto the surface for the mounting holes. See the diagram below
and
Dimensions and weights (page 108) .
2. Make the holes for the mounting screws, and fasten the screws. Use plugs or
anchors if needed. See section
Dimensions and weights (page 108) for the max.
screw diameter.
R0 R1
M
2
M
2
M1
M1
R2-R4
M
2
M1
M2 M1 Frame size
in mm in mm
6.46 164 2.36 60 R0
7.09 180 2.36 60 R1
7.5 190.5 4.17 106 R2
7.52 191 5.83 148 R3
7.52 191 9.21 234 R4
3. Install the drive onto the mounting screws.
40 Mechanical installation
4