ABB ACS180, Hardware Manual, Page: 126 / 168

1
2
3
4
5
6
7
8
9
4
6
Medium voltage network 1
Neighboring network 2
Point of measurement 3
Low voltage 4
Equipment (victim) 5
Equipment 6
Supply transformer 7
Static screen 8
Drive 9
2. An EMC plan for preventing disturbances is drawn up for the installation. A
template is available from the local ABB representative.
3. The motor and control cables are selected as specified in this manual.
4. The drive is installed according to the instructions given in this manual.
WARNING!
To prevent radio-frequency interference, do not use a category C4 drive on
a low-voltage public network which supplies domestic premises.
WARNING!
You can install a drive with the internal EMC filter connected only on a
symmetrically grounded TN-S system.
126 Technical data