ABB 0503060880, Applications Manual

Page: 41 / 90

5.3.5 Creating new BullsEye data instances
Introduction
The default
be_device
,
be_tooldesign
, and
be_scan
data instances provided
with BullsEye cannot be changed because the module is declared as a read-only
resource. Suppose the default parameters provided do not support the BullsEye
setup in your system. A common parameter that sometimes requires a change is
the
Signal Name . The BullsEye scanning device is wired to a digital input in the
controller. The signal name used in BullsEye must match the signal name defined
in system parameters. Creating a new
be_device
data instance allows us to make
that change.
Continues on next page
Application manual - BullsEye 41
3HAC050989-001 Revision: C
© Copyright 2004-2018 ABB. All rights reserved.
5 User guide
5.3.5 Creating new BullsEye data instances