+33 4 7642 9550
www.aaton.com
Cantar-X User Manual v2.44 (r14) 2013 March 21
p.59
p.59
XLR4
plug, Li-Ion
1. – batt
2.
start
*
3. + batt, direct
4. + batt, thru diode
NiMH 12.5V
for XTR, Xtera, and Aaton 35-III
cameras which can’t handle the 16.5V start up voltage
of Li-Ion batteries.
The
Camera battery
housing [1] carries a retaining lug
and a 10A fuse protected Lemo6 socket for high peak
current accessories, e.g. follow focus motors.
The
Cantar battery
housing [2] carries a rear post which
holds the battery flush to the Cantar case, ensuring
EMC shield continuity.
Technical specs
•
12.5V, 3.8Ah
• thermal sensor warns charger if cells reach
60°C
• size 145*73*38mm • weight 720gr
• metallic case, user recellable
Li-Ion 14.8V
, lighter and more powerful than
NiMH batteries (62Wh vs 45Wh), a
must
to drive
Penelope cameras with 14.2V low batt. warning.
The
Camera battery
housing [3] carries a retaining lug
and a 10A fuse protected Lemo6 socket for high peak
current accessories, e.g. follow focus motors.
The
Cantar battery
housing [4] carries a rear post
which holds the battery flush to the Cantar
case, ensuring EMC shield continuity.
Technical specs
•
14.8V, 4.2Ah (6.4Ah blue case)
• pin4 power through protection diode
against NiMH chargers
• size 145*73*38mm • weight 560gr
• metallic case, factory recellable
Lemo 6
socket
outside
1. – batt
4. + batt
6. start
*
XLR4
plug, NiMH
1. – batt
2. thermal sensor
3. thermal sensor
4. + batt
[3]
ref. 04
280 20
w/. lug &
Lemo6
*
for
Penelope
[4]
ref. 20
110 55
w/. rear post
(no Lemo6) for
Cantar
.
[1]
ref. 04
280 10
w/. lug &
Lemo6 for
XTR, 35-III
[2]
ref. 20
110 50
w/. rear post
(no Lemo6) for
Cantar
.
NiMH,
black
Li-Ion
, gray
ANNEX
BATTERIES Recellable Ni-Mh & Lithium-Ion
*
an engraved
white dot reveals
a
camera
battery
wired to transmit a
'start' signal
(short to ground).
