+33 4 7642 9550
www.aaton.com
Cantar-X User Manual v2.44 (r14) 2013 March 21
p.30
p.30
As an alternative to the
So
positions,
Mic-inputs
can be instant-
ly solo-ed by pressing their [fil-tom] buttons;
Line-inputs 1–4
by
pressing [track-solo] buttons 1–4 while the Solo
Mid
Pan switch
is moved to its middle position;
Tracks T1-T6
by pressing [track-
solo] buttons the 1–6 while the
Solo
MidPan switch is pulled
Operator side (p.22).
note1:
the
XX
selection lets you output miXa and miXb
whether or not they are recorded on T7T8.
note2:
Ph Q
adds miXa and miXb to the Operator's se-
lected Out-Map, e.g. the L/R decoded miXa/miXb of
M/S pairs recorded on T1T2, T3T4, T5T6 can be added to
the T7T8 Out-Map
.
AES outputs
The use of the AES outputs (no interference prone cables) is
recommended to send audio signals to the external world.
Connect them to a video camera featuring AES inputs or to a
Lectrosonics D4 transmitter, or to a video camera equipped
with an AES-to-Analog converter.
The eight AES outputs are separated into two groups:
• The
Digi 1–6
outputs either transmit the
T1–T6
recorded
ISO tracks or the "
mic 1–5 & line1
" A to D converted
inputs.
See AUDIO/TC.22, '
Digi
1–6 Out
',
T1–6 Do M1–5+L1 Do (
p.32)
The later position lets you use Cantar's high quality analog
preamplifiers/limiters to feed an external digital mixer and
re-enter the signals through the Digi 1–6 inputs.
note:
when in BLUE Play&Rec mode, the Digi
1–6 outputs
are internally redirected to the Digi 1–6 inputs, unless in
BLUE-BRWS.22, 'AES loop' is set to 'external'.
• The
Digi 7–8
outputs transmit the
Do
selected signals
(p.29).
AES power reminder
As soon as you select an Out-Map with digi-out, the track
icons start flashing in the circular screens to remind you to
turn the AES interface 'ON'. This interface consumes 110mA
at 48kHz and 200mA at 96kHz, if it is not in use, turn it
'OFF' in TECHSET.02 'Digi Power'.
ROUTINGS
DIGI 1–8 OUT
