+33 4 7642 9550
www.aaton.com
Cantar-X User Manual v2.44 (r14) 2013 March 21
p.21
p.21
Record by LTC
This function is also called 'Remote Roll', 'Auto-load' or
'Remote record' depending on the country and manufac-
turer.
Select AUDIO/TC.14 'Rec by Ltc' (p.32):. In PPR posi-
tion, Cantar starts recording upon receiving
running
LTC-in
and stops recording upon receiving
frozen LTC-in
generated by a video camera or an Aaton GMT (see
Remote roll
, p.56).
note:
the source for timecode stamped in each audio
file is either the Cantar's master TC (
int c
), or the remote
master clock's TC (
ext c
).
The remote LTC can carry a continuous Record-Run TC or
a discontinuous Free-Run time-of-day TC. No time overlaps
are created on the breaks since Cantar waits for three
seconds to validate the new LTC then goes to REC while
splicing the preceding three second audio stored in the pre-
record buffer.
If you want to continue the recording knowing the
video camera is about to stop, swiftly switch from PPR
to REC.
Remote by Aaton accessories
Tarkan
Ethernet connected Mac or PC, Cantar-X2 (p.51),
CantaRem
eight linear fader surface (p.53),
Arcan-w
Bluetooth connected PDA (p.55).
Remote by keyboard
In PPR, Cantar can be controlled by a PS2
keyboard
through
a
USB-PS2 to SubD 15
converter (p.58).
Simultaneously press [crtl] [alt] and one of the following:
[r] = REC
[g] = IN-GRIDS
[p] = PPR,
[m] = OUT-MAPS
[t] = TEST,
[a] = AUDIO/TC
[s] = STOP
[k] = TECHSET
[l] = PLAY
[c] = BACKUP (Copy)
[b] = BROWSE
[J] = SESSION
Use the vertical arrows or the numeric pad to scroll the param-
eters, use the horizontal arrows to select the parameter value,
press [enter] for 'ok', [escape] for 'esc'.
PPR
REMOTE CONTROL
