Reinstalling System Software Using Recovery Mode
41-001190-02 Rev. 01, Rel. 1.2
7-19
Troubleshooting Solutions
4
Example:
Enter the name of the CF image file that you downloaded from the Aastra web site in the
“Filename”
field. For example, enter:
vnx.dra
Note:
For HTTP/FTP, you may prefix the file name with an explicit directory path to the location on
the server. For example, enter:
pub/temp/firmware/vnx.dra
5
In the
“Upgrade Type”
field, select the “
CompactFlash ( badblock check)
”, or “
CompactFlash
Card (quick format)”
option.
Available selections are:
•
Restore from ABF
•
CompactFlash Card (badblock check)
•
CompactFlash Card (quick format)
•
On-board Flash
The “
CompactFlash Card (badblock check)
” allows the CF card to be tested for physical errors
before the new firmware is loaded onto it, and takes approximately 30 to 45 minutes. The
“
CompactFlash (quick format)
” allows the new firmware to be directly loaded, but without checking
for errors, and takes approximately 8 minutes.
6
Specify the
“Download Protocol”
used by the local server as either TFTP, FTP, or HTTP.
7
Enter the IP address or DNS address of the TFTP, FTP, or HTTP server, as appropriate.
8
For FTP, also enter the “
Username
” and “
Password
” required for FTP authentication.
AastraLink Recovery UI
Step
Action
Summary of Contents for AastraLink Pro 160
Page 1: ...Administrator Guide Release 1 2 AastraLink AastraLink 41 001190 02 Rev 01 160 160 Pro Pro ...
Page 358: ......
Page 359: ......
