manualshive.com logo in svg

Aastra AastraLink Pro 160, Administrator'S Manual

Share
Download
Aastra AastraLink Pro 160 Administrator'S Manual Download Page 207

Configuring VoIP Settings

41-001190-02 Rev. 01, Rel. 1.2 

4-97

Configuring AastraLink Pro 160 System and Network Parameters

Mobility Base Units (MBUs)

The AastraLink Pro supports the Aastra Mobility Base Unit 400, and the Aastra 
420d DECT Handset. You can register up to 8 handsets with each MBU. The 
MBU supports up to 3 SIP calls simultaneously. 

Note: 

The PSTN port of the MBU is not currently supported when MBU400 is 

configured by AastraLink - outbound PSTN calls will be routed via the 
AastraLink FXO ports. The AastraLink does not support the use of the 
RJ11 FXO interface on the MBU.

Multiple MBU 400 units can be added, identified by MAC address, and then 
registered to the AastraLink Pro. Each registered handset receives a SIP extension 
on AastraLink, including Web UI login and voicemail.

You can add MBU units to the AastraLink Pro using the Web UI at the location, 

Configuration->VoIP->Mobility Base Units.

Summary of Contents for AastraLink Pro 160









































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands