Aastra 675i Series, Administrator'S Manual

Page: 974 / 1184

Softkey/Programmable Key/Feature Key/Expansion Module Key Parameters
A-200 41-001160-03, Rev 00, Release 2.4
IP Phone Administrator Guide
Parameter –
softkeyN states
Idle, Connected, Incoming,
Outgoing, Busy
(in Web UI)
Aastra Web UI Operation->Softkeys and XML
Configuration Files aastra.cfg, <mac>.cfg
Description Displays the status of the phone when a softkey is pressed. You can
enter multiple values (
idle, connected, incoming, outgoing, busy ) for
the "softkeyN state" parameter.
You must associate the softkeyN state parameter with a specific softkey.
In the following example, the softkeyN states parameter is associated
with softkey 12:
softkey12 type: speeddial
softkey12 label: voicemail
softkey12 value *89
softkey12 states: outgoing
Note: The IP phone idle screen condenses the softkeys. So in the
previous example, softkey 12 will appear in position 1 if no other softkeys
are set. A softkey type of "empty" does not display on the idle screen at
all.
Format Text
Default Value For softkey type - None:
All states disabled
For softkey types - Line, DND, speeddial, BLF, BLF List, dcp, XML,
WebApps, lcr, Call Forward, BLF/Xfer, Speeddial/Xfer, Speeddial/
Conf, Directory, Callers List, Icom, Services, empty
:
idle, connected, incoming, outgoing
For softkey type - Flash :
All states disabled
For softkey type - Sprecode, Park :
connected
For softkey type - Pickup:
idle, outgoing
For softkey type - acd:
idle
Draft 1