Aastra 675i Series, Administrator'S Manual

Page: 128 / 1184

Administrator Level Options
3-38 41-001160-03, Rev 00, Releaes 2.4
IP Phone Administrator Guide
Basic Network Settings
If Dynamic Host Configuration Protocol (DHCP) is enabled, the IP phone
automatically configures all of the Network settings. If the phone cannot populate
the Network settings, or if DHCP is disabled, you can set the Network options
manually.
Parameter In
IP Phone UI
Parameter in
Aastra Web UI
Parameters in
Configuration Files
Description
DHCP DHCP dhcp Enables or disables DHCP.
Enabling DHCP populates the
required network information. The
DHCP server serves the network
information that the IP phone
requires. If the IP phone is unable to
get any required information, then
you must enter it manually. DHCP
populates the following network
information:
IP Address, Subnet Mask, Gateway,
Domain Name Servers (DNS),
TFTP, HTTP HTTPS, and FTP
servers, and Timer Servers.
Note: For DHCP to automatically
populate the IP address or qualified
domain name for the TFTP server,
your DHCP server must support
Option 66. The IP phones also
support Option 60 and 43.
For more information, see “DHCP”
on page 4-4 .
IP Address IP Address ip IP address of the IP phone. To
assign a static IP address, disable
DHCP.
For more information, see
“Configuring Network Settings
Manually”
on page 4-24 .
Draft 1