Aastra 675i Series, Administrator'S Manual

Page: 1143 / 1184

Creating an XML Application
41-001160-03, Rev 00, Release 2.4 F-67
The following are examples of using the the “ remote ”, “ local ”, and “ override ”
values with the setType attribute and the AastraIPPhoneConfiguration object.
Remote Setting Examples (default)
The following are examples that are the same as using setType=”remote” setting
for a specific configuration item (softkey1 label).
<AastraIPPhoneConfiguration>
<ConfigurationItem>
<Parameter>softkey1 label</Parameter>
<Value>Test</Value>
</ConfigurationItem>
</AastraIPPhoneConfigutation>
or
<AastraIPPhoneConfiguration setType="remote ">
<ConfigurationItem>
<Parameter>softkey1 label</Parameter>
<Value>Test</Value>
</ConfigurationItem>
</AastraIPPhoneConfigutation>
RESULT : If the value for " softkey1 label " is not specified via the configuration
files, or another setType="remote" setting, the XML examples shown above
assign the value of "
Test ". This value is lost when the phone reboots. If the value
for "softkey1 label" has been specified locally, these XML examples do not
change that value.
Notes:
1. If you enter a value for the “ setType ” attribute in the root tag of the
AastraIPPhoneConfiguration object, the setting affects all of the
configuration parameters and their sub-elements.
2. If you enter a value for the “ setType ” attribute for a single
configuration item, the setting affects on that configuration item and its
sub-elements.
Draft 1