Aastra 55I IP User Manual Download Page 81

Page: 81 / 204

Model 55i IP Phone User Guide

Line Keys, Programmable Keys, and Softkeys

In the "

Type

" field, select "

BLF\List

" (BroadSoft BroadWorks).

In the "

Line

" field, select a line number that is actively registered to the appropri-

ate SIP proxy you are using.

If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or

uncheck (disable) the states you want to apply to this softkey.

In the "

BLF List URI

" field, enter the name of the BLF list defined on the Broad-

Soft BroadWorks Busy Lamp field page for your particular user. For example,
[email protected].

Click

to save your changes.

Note:

The "Label" and "Value" field are not required. The BroadWorks BLF

List name is configured in the "BLF List URI" field instead.

Note:

Contact your System Administrator for the BLF List URI.

Summary of Contents for 55I IP













































































































































































































Search results

Summary of Contents for 55I IP

Reviews:

Related manuals for 55I IP

Brands by name

Popular brands

Aastra 55I IP, User Manual

Search results

Summary of Contents for 55I IP

Reviews:

Related manuals for 55I IP

Brands by name

Popular brands