Aastra 55I IP User Manual Download Page 102

Page: 102 / 204

Model 55i IP Phone User Guide

Line Keys, Programmable Keys, and Softkeys

If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or

uncheck (disable) the "

Connected

" state to apply to this softkey.

Pick another key (from top or bottom keys) to configure for Picking up a call.

In the "

Label

" field, enter a label for the Pickup key.

10.

In the "

Value

" field, enter the appropriate value based on the server in your net-

work.

11.

In the "

Line

" field, select a line for which to apply the Pickup configuration.

12.

If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or

uncheck (disable) the "

Idle

" and "

Outgoing

" states to apply to this softkey.

13.

Click

to save your changes.

Note:

For values to enter in this field, see the table

"Park/Pickup Call Server

Configuration Values"

page 91

Summary of Contents for 55I IP













































































































































































































Search results

Summary of Contents for 55I IP

Reviews:

Related manuals for 55I IP

Brands by name

Popular brands

Aastra 55I IP, User Manual

Search results

Summary of Contents for 55I IP

Reviews:

Related manuals for 55I IP

Brands by name

Popular brands