Aastra 55I IP, User Manual

Page: 115 / 204

Model 55i IP Phone User Guide 107
Line Keys, Programmable Keys, and Softkeys
Empty Key (softkeys only)
You can set a softkey to force a blank entry on the IP phone display for a specific key.
You do this by setting the softkey to "
empty ". The keys are added in order (from key
1 to key 20) after any hard-coded keys have been added. If a particular key is not
defined, it is ignored.
Setting an Empty Key
Use the following procedure to configure an Empty softkey on the 57i phone.
1. Click on Operation->Softkeys and XML .
or
Click on
Operation->Expansion Module <N> .
2. For softkeys, select from "Key 1" through " Key 20 ".
3. In the " Type " field, select Empty .
4. When configuring a softkey, in the state fields, check (enable) or uncheck (dis-
able) the states you want to apply to this softkey.
5. Click to save your changes.
Aastra Web UI