Aastra 55I IP, User Manual

Page: 11 / 204

Model 55i IP Phone User Guide 3
Introduction
Requirements
The 55i IP Phone requires the following environment:
• SIP-based IP PBX system or network installed and running with a SIP
account created for the 55i IP phone.
• Access to a Trivial File Transfer Protocol (TFTP), File Transfer Protocol
(FTP), Hypertext Transfer Protocol (HTTP) server, or Hyper Text Transfer
Protocol over Secure Sockets Layer (SSL) (HTTPS).
• Ethernet/Fast Ethernet LAN (10/100 Mb)
• Category 5/5e straight through cabling
• Power source
For Ethernet networks that supply in-line power to the phone (IEEE 802.3af):
- For power, use the Ethernet cable (supplied) to connect from the phone
directly to the network for power. (No 48v AC power adapter required.)
For Ethernet networks that DO NOT supply power to the phone:
- For power, use the 48V AC Power Adapter (included) to connect from the
DC power port on the phone to a power source.
or
- (optional) - For power, use a Power over Ethernet (PoE) power injector or a
PoE switch. A PoE power injector is available as an optional accessory
from Aastra Telecom. Contact your Administrator for more information.
Installation and Setup
If your System Administrator has not already setup your 55i phone, please refer to
the
Aastra 55i Installation Guide for basic installation and physical setup
information. For more advanced administration and configuration information,
System Administrators should refer to the
Aastra SIP 53i, 55i, 57i, 57i CT IP Phone
Administrators Guide.