Aastra 55I IP, User Manual

Page: 114 / 204

106 Model 55i IP Phone User Guide
Line Keys, Programmable Keys, and Softkeys
None Key
You can set a softkey or programmable key to force a blank entry on the IP phone
display for a specific key. You do this by setting the key to "
none ". The keys are
added in order (from key1 to key20) after any hard-coded keys have been added. If a
particular key is not defined, it is ignored. For more infomration about key behavior,
see
"Key Display Behavior" on page 58 .
Setting a None Key
Use the following procedure to configure a None key on the 55i IP Phone. The
procedure shows the softkey screen as an example.
1. Click on Operation->Softkeys and XML .
or
Click on Operation->Programmable Keys .
or
Click on
Operation->Expansion Module <N>. .
2. For softkeys, select from "Key 1" through " Key 20 ".
or
For programmable keys, select from " Key 1 " through " Key 6 ".
3. In the " Type " field, select None .
4. If configuring a softkey on the Bottom Keys, in the state fields, check (enable) or
uncheck (disable) the states you want to apply to this softkey.
5. Click to save your changes.
Aastra Web UI