A&D Omniace III RA2300A, Instruction Manual

Page: 90 / 196

11. Multi Recorder - Separately Executing Waveform Printing, Memory Recording and HD Recording
RA2300A Recorder (7001754-R01)
11-6
The fastest chart feed speed is 100 mm/s. If the value equivalent to recording speed
exceeds this value, printing with fastest speed will be made.
c）
Chart feed speed setup
When no tick is made for the checkbox for Operations synchronized to recording speed,
setting of the chart feed speed that is separated from the recording speed can be made.
11.3. Recording Operation
The multi-recording begins when the Start button on the Operation Panel is pressed. Recording set
through waveform printing, Memory Recording, or HD Recording can be made simultaneously.
For memory recording, see 9. Memory Recorder. For HD recording, see 10. HD Recorder.
11.3.1. Error Generation
Error that may occur during multi recording and operations are described as follows.
Error Operation
File error HD recording will stop with an error. If waveform chart printing and
memory recording or memory recording are operating, the operation
continues.
Paper-out error Memory recording and HD recording continues. The waveform chart
printing will stop with an error. After the chart paper is filled, recording
resumes.
NOTE