RA2300A (7001754-R01)
7
Overview of Windows XP Embedded
This product employs Windows XP Embedded as the OS. Please read and understand the following
instructions carefully before use.
(1) License
The Windows
XP
Embedded is provided as built-in only license. This product cannot function
as general purpose PC, it is limited exclusively for RA2300A use. Duplication of installed system
of this product is not allowed be used.
(2) Power ON/OFF
Please make sure that HDD is not being accessed before turning the power off. If the power is
turned off while HDD is being accessed, not only it may cause damage to data recorded on the
HDD but also it may fatally damage the HDD machine itself to unusable condition. To confirm that
HDD access has been stopped before turning the power off, please press EXIT on System button
to stop the system, then turn off the power. When exit command is being processed, it does not
leave record of starting or set ups in registry. OS will always start up in the condition set at the
time of factory shipment. (Set values are saved under separate file and will not be lost.)
(3) Virus
We take following measures in order to lower the possibilities of virus infections.
●
Mailing function is not provided.
●
System protect with light filter.
System drive, which contains OS and other applications, cannot be overwritten; normally
those will not be affected under any condition, however, if internal HDD has been accessed
as a shared file on network system, it is possible that files saved in HDD will be infected by
viruses. In case there are possibilities that virus-infected files are saved in HDD, please
eliminate the virus by going through the following procedures. If other PCs connected to the
same network access the subject file, the PC could become the source of infection. Please
set up one to one network environment and run anti-virus software from a PC targeting the
HDD of this product in order to check and eliminate viruses. Anti-virus software cannot be
installed directly to this product.
(4) Network use
Please consult your network administrator to make sure that other tasks are not affected by
connecting this product to the network. (Transmitting high volume of data would cause higher
network traffic.)
(5) USB compatible devices
Devices that are compatible for this product are limited by default setting. It works differently than
Windows on PCs, and it is not possible to install additional device drivers. Compatible devices for
this product are limited to the devices listed below. Please do not connect other devices. Other
devices are not subject of our guarantees.
-USB memory (The USB memory with a security function cannot be used.)
(6) Maintenance
Please use the files provided by our company for the back-ups of application programs and
please run those application programs from system menu.
(7) Others
We do not assumes any responsibility or provide support for malfunctions if programs that are not
provided by us are installed into the system or compulsory termination command is used through
external keyboard and such.
Windows, Windows XP, Windows XP Embedded are trademarks or registered trademarks of
Microsoft Corporation in US and other countries.
Summary of Contents for Omniace III RA2300A
