A&D Omniace III RA2300A, Instruction Manual

Page: 122 / 196

15. Display and Printing (Settings for Monitor Display and Printing)
RA2300A Recorder (7001754-R01) 15-2
15.1. Settings for Display and Printing
Display and Printing is used to set X-Y display of waveforms or printing format for waveform. Pressing
the Display and Printing button on the Operation Panel opens the screen for settings.
15.1.1. Scale Indication
The Y axis appears beside the waveform monitor when check mark is added to the check box (1)
on the Display and Printing screen. Channel whose scale is displayed can be specified with the
channel buttons (2) on the Display and Printing screen.
Only one row is used for scale indication. If there are two or more channels on one
waveform recording frame, only the first channel’s scale will be indicated. To display the
next channel, turn off the channel display for the first channel.
15.1.2. Grid Display
Pressing the button (3) on the Display and Printing screen turns on or off the grid indication.
15.1.3. Digital Value Display
To indicate digital values of each channel, tick the check box for (4) on the Display and Print screen.
Also, when Peak-format data is referenced in the Replay monitor, it is possible to set whether
maximum or minimum value should be displayed or not using button (5).
15.1.4. Signal Name Indication
To display the signal name of each channel by the waveforms being displayed, tick the check box
for (6) on the Display and Printing screen.
The character strings for signal name can be set to each channel in Print Settings in
Recording Settings tab on the System screen.
Note
TIPS
◆
◆
(1)
(2)
(3)
(4)
(6)
(5)
(7)
(8)
(10)
(9)
(11)