A&D Omniace III RA2300A, Instruction Manual

Page: 25 / 196

2. Name and Function of Each Block
RA2300A (7001754-R01) 2-5
(6) Replay: Replay of recorded data
The replay monitor screen, which has gray background, offers replay and observation of the
data stored in memory, internal HDD, and external media. Replay format can be selected from
among waveform, value, and X-Y.
 Buttons related to recording
(7) Amp: Displaying the amp screen
Setting for amp units such as range and input ON/OFF can be made.
(8) Recording conditions: Setting recording speed
Settings for recording such as sampling speed, chart feed speed, pre-trigger settings are made.
(9) Trigger: Displaying trigger screen
Settings for trigger conditions such as trigger level selection, trigger level setup, and trigger
conditions.
(10) Auto: Automatic operation settings
Auto makes automatic settings for analog amp range and recording speed.
(11) Display/Printing: Settings for data display on the monitor and
printing on the chart paper
Printing and display format can be set.
(12) System: Displaying system screen
The following settings are available: Measurement mode that decides measurement method,
Maintenance that sets date, RS-232C, LAN, and Communication that sets remote.
 Buttons related to recording and printing
(13) Chart Feed: Feeding chart recording paper
While this button is pressed, chart recording paper is fed.
(14) Screen Copy: Hard copy for screen
Pressing this button makes hard copy for the current screen. The output media (paper or bit
map file) can be designated in the system settings.
(15) Trigger: Trigger LED
LED comes on when the trigger is generated.
(16) Marking/Manual Trigger: Adding mark indication on printing or
manually triggering
Mark indication such as time can be added to printing. Measurement can be started by man
ual trigger.
(17) Start: Starting measurement
Pressing this button starts measuring. The LED of the button blinks during the measurement.
(18) Stop: Halting operation
Pressing this button halts the measurement or operations such as screen hardcopy.
(19) HDD/POWER: LED
HDD: LED blinks when the internal HDD is accessed.
POWER: LED blinks immediately after power-on.