A&D Omniace III RA2300A Instruction Manual Download Page 135

Page: 135 / 196

16. System Setup (Other Functions)

RA2300A Recorder (7001754-R01)

16-11

16.5.2. Data No. Setting

The number that is assigned to the measurement data can be changed. In the System screen use the

Recording Settings screen. Pressing

Data No.

displays numeric pad, enabling value data entry.

The data number increments automatically after recording. This function is useful to identify

the recording data order. The data number can be confirmed on the upper portion of the

waveform printing and replay monitor.

16.5.3. Print Settings

This screen is used to set printing format such as chart paper waveform printing. In the System screen,

press the Recording Settings screen. Pressing

Print Settings

displays the following screen.

(3)Grid pattern setting

(4)Amplitude Scale Settings

(1)Printing Item ON/OFF

(2)Annotation character string entry

(1) Printing Item ON/OFF

Whether to print or not print can be determined using tick box for channel mark, system

annotation, channel annotation, time-axis scale, measurement information, signal name, and user

annotation.

(2) Annotation character string entry

Character strings for measurement information, signal name, and user annotation can be made.

A text file that is edited by a personal computer can be read. For more details, see

[16.4.6Environment Save] [16.4.7Readout].

(3) Grid pattern setting

The grid pattern for waveform or X-Y printing can be specified.

(4) Amplitude Scale Settings

Whether the amplitude scale is printed or not can be specified. Also, if the scale is printed,

printing format can be specified.

Batch: Only maximum and minimum values are printed in one line. The middle scale is not

printed.

Individual: The middle scale is also printed but more chart paper will be consumed as one

channel takes one line to print. To save chart paper, it is recommended to select Batch.

TIPS

◆

TIPS

TIPS

◆

Summary of Contents for Omniace III RA2300A





































































































































































































Search results

Summary of Contents for Omniace III RA2300A

Reviews:

Brands by name

Popular brands

A&D Omniace III RA2300A, Instruction Manual

Search results

Summary of Contents for Omniace III RA2300A

Reviews:

Brands by name

Popular brands