A&D Omniace III RA2300A Instruction Manual Download Page 176

Page: 176 / 196

20. Specifications

RA2300A Recorder (7001754-R01)

20-8

20.2.6. Monitor displaying and setting function

Use the Operation Panel (including jog dial) and the touch panel to configure various settings

(1) Input Setting Screen

Use this screen to configure the waveform of input signals and input setting.

Digital values and cursor values of an input signal can be displayed.

Operation Panel

Configuration

Input

Display waveforms on the whole screen.

Amp

Configure amp settings and physical quantity conversion of an input signal.

Trigger

Configure the settings of trigger modes, trigger conditions, recording

operations, pre-triggers, and trigger filters.

Acquisition

Configure the settings about recording such as speed.

View/Record

Configure the settings such as scale views, signal names, grids, waveform

segmentations.

Operation Button

Configuration

FREEZE

Monitor Displaying can be paused.

TRIG SYNC

Monitor Displaying synchronized a trigger detection is available.

Switching

Monitor

Monitor Displaying under each of specified condition is available.

Monitor Speed

Configure the speed of input monitor.

Digital Display

Display input signals in digital form.

Key Lock

Cancel the Key Lock setting.

(2) Playback Setting Screen

Use this screen to select the main unit’s memory and the filing data, configure physical

quantity conversion setting, display playback waveforms, and so on.

Screen Select

Button

Configuration

Selecting Data

Select the data for playback.

Output

Specification

Configure where to output and the output condition.

Copy

Copy the range specified by an output setting.

Digital Display

Configure the digital value for displaying.

Signal Setting

Configure the amp setting of a channel of which data is played back.

Jump

Configure an arbitrary position to move the range of monitor displaying.

Time Axis

Configure narrowing/extending of waveform time axis.

X-Y

Display data in X-Y format.

Key Lock

Configure ON/OFF of a Key Lock

Summary of Contents for Omniace III RA2300A





































































































































































































Search results

Summary of Contents for Omniace III RA2300A

Reviews:

Brands by name

Popular brands

A&D Omniace III RA2300A, Instruction Manual

Search results

Summary of Contents for Omniace III RA2300A

Reviews:

Brands by name

Popular brands