A&D Omniace III RA2300A, Instruction Manual

Page: 177 / 196

20. Specifications
RA2300A Recorder (7001754-R01) 20-9
20.3.Specifications by each measurement mode
20.3.1. Memory Recorder mode
Use this mode to acquire measuring data of input signals to the main body’s memory This mode is
mainly used for measuring high-speed phenomenon based on the trigger After the recording, the
data can be displayed on a playback monitor and be copied.
(1) Memory Acquisition
recording speed
Configure by the sampling speed (period).
1 to 999  s, 1 to 999 ms, and 1 to 100 s. can
1 to 999  s, 1 to 999 ms, and 1 to 100 s can be configured for user 1 and
user 2.
*Acquisition by external clock synchronization
(Remote Unit: due to the option of an external sample input)
Time Axis 0.01%
Memory Space 2 MW/CH
Block division 1 to 128 Block
Acquisition
Operation
Push the start key on the operation panel to start. (Staring with time trigger is
also available)
Once, Repeat, and Endless settings are available.
Acquisition
Method
Acquisition Operation
Once Measurement is made once and is finished.
Repeat
A measurement is repeated the same times as the
number of memory block and is finished.
Endless A measurement is repeated until it is stopped.
*For endless, the existing data is overwritten.
Copy Range
Specified Range, Centering Trigger
Copy Range Copy Operation
Specified Range Within any cursors, copy between two points
Centering Trigger Center Trigger to copy with 1% to 100% of data.
(2) Auto Copy Printing
After recording of memory data into a main unit, the data is copied or output to a file.
(ON/OFF is available)
Copy Range Center Trigger to copy to a recording paper with 1% to 100% of data.
Where to output Output to a recording paper or a file.
Data Format for
File Output
Center Trigger to output to a file with 1% to 100% of data.
*CSV is a comma or tab delimited text format that can be used in
spreadsheet software.
*File extension FSD (binary), CSV (CSV)
Acquisition Drive Built-in HDD drive or External Drive (USB supported)