RT40 Operator’s Manual
Service - 121
10 Hour
Roller Boom with Grease Cylinder
With boom horizontal, measure distance from bottom of boom to chain (2). When properly adjusted,
distance should be 1.5-2.0
”
(40-50 mm).
To tighten chain, remove plug and pump MPG into cylinder (1). To relieve chain tension, loosen plug on
grease cylinder.
Plow
Clean Feed Tube
Clean feed tube every 10 hours. Oil if necessary.
Fluid pressure could pierce skin and cause injury or death. Stay away.
NOTICE:
Service digging boom grease cylinder only while standing on opposite side of
boom. Wear gloves and safety glasses, and cover fitting with cloth when relieving pressure
in cylinder.
t14om029h.eps
1
2
t14om033h.eps
*Always follow manufacturer instructions*
*AAA Rent-All 225-291-1356*
