RS-232 Protocol & Telnet Commands
COMMAND
DESCRIPTION
$SOURCE_
DETECT? N1
cont’d
HSW [Horizontal sync width pixels]
HT [Total horizontal pixels]
HSP [Horizontal sync polarity]
HVS_OFFSET1 [Horizontal/vertical sync offset1 in dot]
HVS_OFFSET2 [Horizontal/vertical sync offset2 in dot]
PIXEL_CLOCK [Pixel clock in KHz]
SCAN [Video scan mode (P=Progressive, I=Interlaced)]
TIMING [Video timing (See “Source Video Timing List”)]
TMDS_CLOCK [TMDS clock in KHz]
VA [Vertical active lines]
VBP [Vertical back porch lines]
VFP [Vertical front porch lines]
VSW [Vertical sync width lines]
VT [Total vertical lines]
VSP [Vertical sync polarity]
ACR [Audio-Clock-Recovery packet status]
ACR_CTS [Audio-Clock-Recovery CTS value]
ACR_N [Audio-Clock-Recovery N value]
ASP [Audio-Sample packet status]
ASP_CH [Audio-Sample packet channel number]
ASP_FIFO [Audio-Sample packet audio FIFO (error or normal)]
ASP_LAYOUT [Audio-Sample packet layout]
ASP_PLL [Audio-Sample packet PLL (locked or unlocked)]
CHS_CODE [Channel-status audio coding]
CHS_SR [Channel-status sampling rate in KHz]
CHS_SS [Channel-status sampling size]
CHS_TYPE [Channel-status application type (consumer or
professional)]
HBR [High-Bit-Rate packet status]
AIF [Display packet-AIF data in 2-digit hex]
AVI [Display packet-AVI data]
DRMI [Display packet-DMI data]
GCP [Display packet-GCP data]
SPD [Display packet-SPD data]
22
