RS-232 Protocol & Telnet Commands
COMMAND
DESCRIPTION
$HDR_SET N1
Select the current HDR setting.
N1
= 1~3
$HDR_SET?
Display the current HDR setting.
$HDR_SW N1
Enable or disable HDR support on the unit’s HDMI output.
N1
= ON, OFF
$HDR_SW?
Display the current HDR support status for the unit’s HDMI
output.
$HDR_TX_COL N1
Set the HDMI output (Tx) AVI Colorimetry mode.
Available values for
N1
:
1
[No Data]
2 [ITU601]
3 [ITU709]
4 [xvYCC601]
5 [xvYCC709]
6 [sYCC601]
7 [AdobeY601]
8
[Adobe RGB]
9
[BT.2020 (1) Y’CC’BCC’RC]
10
[BT.2020 (2) R’G’B’ or Y’C’BC’R]
$HDR_TX_COL?
Display the current HDMI output (Tx) AVI Colorimetry mode.
$MODEL?
Display the unit’s model number.
$MOTION_TEXT
N1
Set the text used for the Motion-H and Motion-V patterns.
N1
= {Text} [20 characters max]
$MOTION_TEXT?
Display the current text used for the Motion-H and Motion-V
patterns.
$NET_GATE?
Display the current Gateway address.
$NET_IP?
Display the current IP address.
$NET_IP_MODE
N1
Set the IP mode.
Available values for
N1
:
DHCP [Automatically get an IP address via DHCP]
STATIC [Use the currently defined static Ethernet values]
$NET_IP_MODE?
Display the current IP mode.
$NET_LINK?
Display the current Ethernet link status.
19
