4RF Aprisa XE, User Manual

Page: 67 / 272

Configuring the terminal | 66
Saving the terminal's configuration
Note: To save cross connection configurations, see page 130.
To save a configuration:
1. Ensure you are logged in with either 'modify' or 'admin' privileges.
2.
Select Local > Maintenance > Config Files > Save MIB.
3.
Select the 'Save to disk' option in the dialog box that appears.
4. In the next dialog box that appears, navigate to the directory where you want to save the file, enter
a suitable filename, and then click Save (The default name for this file is backupForm).
Note 1: If this dialog box does not appear, change your Internet security settings to allow
downloads. You may also need to check your default download location.
Note 2: Pop-ups must be enabled on you PC for this function to work (see “PC settings for
SuperVisor” on page 44).
To load a configuration into a terminal:
Important: Only load a saved configuration file to another terminal that has exactly the same
configuration (RF variant and interface cards).
1. Ensure you are logged in with either 'modify' or 'admin' privileges.
2. Select Local or Remote > Maintenance > Config Files > Load MIB.
3.
Click Browse and then navigate to the file and select it.
4.
Click Upload to load the configuration file into the terminal.