4RF Aprisa XE, User Manual

Page: 53 / 272

Managing the terminal | 52
To get or set the IP address of a terminal using setup
To get the IP address of a terminal using setup:
1.
At the prompt, type 1 and enter.
The following information appears:
ƒ the IP addresses of the local and remote terminals
ƒ the subnet mask and gateway of the local terminal
ƒ the TFTP of the remote terminal
To set the IP address of a terminal using setup:
1.
At the prompt, enter 1.
2.
Enter 3 to configure the local terminal IP address.
Set the following for the terminal using the standard format xxx.xxx.xxx.xxx:
ƒ 1) IP address
ƒ 2) Subnet mask
ƒ 3) Gateway address
3.
Enter 4 (Quit) to return to the main menu.
4. Enter 6 to configure the remote terminal IP address.
Important: You must ensure that the IP addresses of the local and remote terminals are on the
same subnet as the PC being used to configure the terminals.
5.
Enter 4 (Quit) to return to the main menu.
6. Enter 9 (Are you sure y/n) to reboot the terminal.