4IPNET HSG800 User Manual Download Page 87

Page: 87 / 108

User’s Manual

OWL800 / OWL2000 / HSG800

ENGLISH

4.5.4 System Upgrade

OWL800 provides Web firmware upload/upgrade feature. While the new firmware is obtained, it has to put locally in

the administrator’s computer. The users can easily download the latest firmware from the website and upgrade the

system. To upgrade the system firmware, click

Browse

button to choose the new firmware file and then click

Apply

button to execute the process. There will be a prompt confirmation message appearing to notify the administrator to

restart the system after successful firmware upgrade.

Gateway & AP Mode

Although the system will check the firmware's contents to ensure its integrity, it is still recommended to check the

version number before action proceeded.

Please note that firmware upgrade may sometime result in loss of some data. Please ensure that you read the

release notes to understand the limitations before upgrading the firmware. Please restart the system after

upgrading the firmware.

Do not power on/off the system during the upgrade or the restart process as it may damage the system.

For further information of available firmware version, please contact local dealers.

Summary of Contents for HSG800













































































































Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands

4IPNET HSG800, User Manual

Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands