4IPNET HSG800, User Manual

Page: 3 / 108

User’s Manual
IEEE802.11 b/g Outdoor AP/Bridge (Support IEEE802.11a Client Backhaul)
OWL800 / OWL2000 / HSG800
ENGLISH
Regulatory Information
The device contains two radio modules inside. Although the model of the radio modules themselves has obtained
the FCC modular approval, independently the whole system (with the antennas and power supplier installed) has
been tested and evaluated again by a certified laboratory for the verification of FCC, CE and NCC compliances.
This device requires professional installation . Installers please refer to the caution statements under each
regulatory section to make sure the final installation meet the regulation within you territory. If you are in the North
America, please read the caution statements in FCC section. If you are in the Europe countries, please read the
caution statements under CE. And if you are in Taiwan, please read the Chinese statements under NCC. In addition,
it is important for all to read the following Safety Information first.
Safety Information
All models of OWL800, OWL2000, and HSG800 have been evaluated to, and conforms to the product safety specifications of
EN:60950:2001+A11:2004.
Caution:
ƒ
This product was qualified under test conditions that included the use of the power supplying equipment. To ensure
regulatory and safety compliance, use only the provided power supplying equipment and install them properly.
ƒ
To prevent electrical shock, this device may require a grounding conductor in the line cord. Connect the unit to a grounding
type ac wall outlet using the power supplying equipment supplied with the unit.
ƒ
To avoid the risk of electric shock and for a safety outdoor installation, you may need other items, such as surge arrestors.
ƒ
To avoid the risk of electric shock from lightening, do not install or use this product during an electrical storm.
ƒ
Operate and install this product as described in this manual. This device must be installed and used in strict accordance
with the manufacturer's instructions.
ƒ
Do not open the device casing. Do not perform any servicing other than that contained in the installation and
troubleshooting instructions. Refer all servicing to qualified service personnel.