4IPNET HSG800 User Manual Download Page 34

Page: 34 / 108

User’s Manual

OWL800 / OWL2000 / HSG800

ENGLISH

Gateway Mode

System Information

For the purpose of maintenance, it is required to specify the system name, its location and corresponding basic

parameters. Fields “Name”, “Description” and “Location” are used for mnemonic purpose. It is recommended to

have different values for each AP. Time settings allow you to set OWL800’s system time manually or have it

synchronized automatically with NTP server. When NTP server is used, NTP server1 must be filled. If FQDN (full

qualified domain name) is used, the DNS server setting must also be activated.

Name:

System name used to identify this box

Description:

Give further information about this installation

Location:

The geographic location

Summary of Contents for HSG800













































































































Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands

4IPNET HSG800, User Manual

Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands