4IPNET HSG800 User Manual Download Page 99

Page: 99 / 108

User’s Manual

OWL800 / OWL2000 / HSG800

ENGLISH

4.6.7 User Log

This function is used to check the history of the system and it will be kept up to 3 days. All records are sorted by date

and listed accordingly. Please note that these records are stored on the volatile memory and will be lost if the system

is powered off.

Gateway & AP Mode

Users

Log:

The

Users Log

provides information of all users' login and logout activities except guest users,

RADIUS roaming in/out users, and SIP clients.

Session

Log:

Log each connection created by clients and tracking the source IP and destination IP.

Session

Log can be sent to the SYSLOG server or via email automatically. In addition, it can be uploaded to a FTP

server periodically.

Summary of Contents for HSG800













































































































Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands

4IPNET HSG800, User Manual

Search results

Summary of Contents for HSG800

Reviews:

Related manuals for HSG800

Brands by name

Popular brands