manualshive.com logo in svg

4IPNET HSG800, User Manual, Page: 78 / 108

Share
Download
4IPNET HSG800 User Manual Download Page 78

 

User’s Manual 

  OWL800 / OWL2000 / HSG800

 

ENGLISH 

 

 

© 2008 4IPNET, INC. 

 

69

4.4.4 Policy 

The system supports multiple control Policies, including the 

Global Policy

 and individual 

Policy 

(1 ~ 16). Each 

Policy consists of access control profiles that can be configured respectively and applied to users. 

 

ƒ

 

Global Policy:   

Global is the system’s universal policy including 

Firewall Rules

, 

Specific Routes Profile

 which will be applied to all 

users unless the user has been regulated and applied to another policy. 

 

Gateway Mode >> Global Policy 

   

Firewall Profile: 

Global policy and each policy have a firewall service list and a set of firewall profile which is 

composed of firewall rules. 

 

Specific Route Profile: 

The default gateway of WAN1, WAN2, or a desired IP address can be defined in a 

policy. When Specific Default Route is enabled, all clients applied this policy will access the Internet through 

this default gateway. 

Summary of Contents for HSG800













































































































Reviews:

No comments