4IPNET HSG800, User Manual

Page: 86 / 108

User’s Manual
OWL800 / OWL2000 / HSG800
ENGLISH
© 2008 4IPNET, INC.
77
4.5.3 Backup & Restore
This function is used to backup and to restore the OWL800 settings. The OWL800 can also be restored to the
factory default settings using this function. It can be used to duplicate settings to other access points (backup
settings and then restore in another AP).
Gateway & AP Mode
ƒ
Reset to Default: Click Reset to load the factory default settings of the OWL800. After confirming this
action, the system will reset all parameters. Reboot to let the default settings takes effect.
ƒ
Backup System Settings: Click Backup button to save the current system configurations to a backup file
on a local disk of the management console. A backup file for OWL800 keeps the current system settings as
well as the local user accounts. Before any configuration changed, it is recommended to backup the system
before you proceed with any changes; thus, it can be recovered soon if occasionally something wrong
happened.
ƒ
Restore System Settings: Click on the Browse button to select configuration file to restore, and then,
press Upload to proceed. After confirming the action, the system will start to replace the existing settings
with this newly upload one; reboot the system as required to ensure the parameter changes take effect.
Since network parameters have been reset/restored, the administrator may need to change PC’s network
settings in order to match OWL800’s default settings.