4IPNET HSG800, User Manual

Page: 5 / 108

User’s Manual
IEEE802.11 b/g Outdoor AP/Bridge (Support IEEE802.11a Client Backhaul)
OWL800 / OWL2000 / HSG800
ENGLISH
CE Regulatory Information (for Europe)
Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for
European Community, Switzerland, Norway, Iceland, and Liechtenstein
Models: OWL800, HSG800 and OWL2000
All three models have been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety
requirements of R&TTE Directive within the CE marking requirement.
• Radio: EN 300.328
:2006
• Radio: EN 50392
:2004
• EMC: EN 301.489-1
:2005
, EN 301.489-17
:2002
,
• EMC: EN 55022
:2006
Class B, EN 55024
:1998
+ A1
:2001
+ A2:
2003
including the followings:
EN 61000-3-2, EN 61000-3-3.
EN 61000-4-2, EN 61000-4-3, EN 61000-4-4,
EN 61000-4-5, EN 61000-4-6, EN 61000-4-11
• Safety: EN 60950-1
:2001
+ A11
:2004
,
Caution:
ƒ
This declaration is only valid for configurations (combinations of software, firmware, and hardware) provided and supported
by 4ipnet Inc. The use of software or firmware not provided and supported by 4ipnet Inc. may result in the equipment no
longer being compliant with the regulatory requirements.
ƒ
European standards dictate maximum radiated transmit power of 100mW EIRP and frequency range 2.400-2.4835 GHz.
ƒ
This equipment is intended to be used in all EU and EFTA countries. Outdoor use may be restricted to certain frequencies
and/or may require a license for operation. Contact your local regulatory authority for compliance.