4IPNET HSG800, User Manual

Page: 19 / 108

User’s Manual
OWL800 / OWL2000 / HSG800
ENGLISH
© 2008 4IPNET, INC.
10
3.2.2 User Login Portal Page
To be granted the network access via OWL800, clients have to be authenticated by the system first via entering the
correct usernames and passwords in the User Login Portal Page as shown below. The local account generated
previously in the Setup Wizard section is used as the example to illustrate this procedure.
Step 1:
Connect a client’s PC to OWL800 via any one of the LAN Ports. The IP address will be assigned to the PC
automatically via DHCP.
Step 2:
Verify New Local Account:
To verify whether the configuration with DHCP via the Setup Wizard is done properly, firstly, connect a client’s PC
from the system to LAN1 Port. The device will get an IP address automatically via DHCP.
Next, open a web browser and access any URL, and then the default User Login Page will appear.
Enter the username and password of the local user account generated by Setup Wizard previously (e.g.
“test@local” as the Username and “test” as the Password ), then click Login.
Note:
1. OWL800 supports both local built-in user database and external authentication database, such as RADIUS and
LDAP. Thus, by entering the full username, the system will automatically identify which authentication server is used.
Exception: The postfix can be omitted only when the default authentication option is used; “local” is the default
authentication option of the system. You may therefore enter either ‘test’, or ‘test@local in the username field for
the previous example.
2. The format of a valid Username is: UserId@postfix, where UserId is the User ID, and postfix is a name for the
chosen authentication option.