manualshive.com logo in svg

4IPNET HSG800, User Manual, Page: 84 / 108

Share
Download
4IPNET HSG800 User Manual Download Page 84

 

User’s Manual 

  OWL800 / OWL2000 / HSG800

 

ENGLISH 

 

 

© 2008 4IPNET, INC. 

 

75

4.5 Utilities 

This section provides information on four utilities used for customizing and maintaining the system, including 

Change Password

,

 Import & Export

, 

Backup & Restore

, 

System Upgrade

,

 Reboot

, 

Scan

 and

 Upload 

Certificate

. 

 

4.5.1 Change Password 

To protect the administration web site from unauthorized access, it is strongly recommended to change the default 

administrator's password to your own one. Only alpha-numeric characters pattern is allowed and it is strongly 

recommended to take a combination of both numeric and alphabetic characters.   

 

Gateway Mode 

 

AP Mode

 

The administrator/manager/operator can change the passwords of the system. The login account for the 

administrator is “admin”. The admin password of the system can be changed here by entering the new password. 

The default admin password of the system is "admin". Click

 Apply 

to activate the new passwords. 

Summary of Contents for HSG800













































































































Reviews:

No comments