4IPNET HSG800, User Manual

Page: 14 / 108

User’s Manual
OWL800 / OWL2000 / HSG800
ENGLISH
© 2008 4IPNET, INC.
5
3.1.2 Panel Function Descriptions
Lower Panel
ƒ
PoE1 / PoE2: For connecting to the PSE
o
In AP/Relay mode, PoE1 and PoE2 work as LAN ports.
o
In Gateway mode, PoE1 works as a WAN port and PoE2 works as a LAN port.
ƒ
Console:
o
Attach the RJ45-RS232 console cable here.
Upper Panel
This picture represents ANT 1 ~ ANT 4 connectors from right to left when OWL800 chassis (with Mylar) is faced up.
Each of the two radio module (CM9) inside has two antenna connectors for antenna diversity. The required
antenna is antenna ANT1 and antenna ANT2. ANT1 is connected to the “Main” contact point of the first radio
module. ANT2 is connected to the “Main” contact of the second module.
The other two antennas are optional for antenna diversity. The antenna ANT3 is connected to the “Aux” contact point
of the first radio module, while ANT4 is connected to the “Aux” contact point of the second radio module. For further
details on antenna, please refer to the section 4.6.3..