4IPNET HSG800, User Manual

Page: 60 / 108

User’s Manual
OWL800 / OWL2000 / HSG800
ENGLISH
© 2008 4IPNET, INC.
51
4.2.5 Advanced
Virtual AP advanced settings should mostly meet general requirements. Take the following parameters for the
purpose if occasionally it is necessary to tune or debug the wireless network.
Gateway & AP Mode
ƒ
Beacon Interval : This interval specifies the time interval, in milliseconds. Between each beacon frame is
transmitted.
ƒ
RTS Threshold : To control station access to medium and to alleviate this effect of the hidden terminal problem,
we can tune this RTS threshold value. It should have a value among 1-2346 and is default to 2346.
ƒ
Fragmentation Threshold : A unicast frame larger than this threshold will be fragmented before the
transmission. If significant numbers of collisions are occurring, we can try to take a smaller value of the
fragmentation threshold to see if it helps.
ƒ
Broadcast SSID : Disable this item will prevent the OWL800 from broadcasting its SSID publicly.
ƒ
Wireless Station Isolation : By enabling this item, all stations in the same OWL800's coverage area can only
communicate with the OWL800 only.
ƒ
WMM : To decide which data streams are most important and assign them a higher traffic priority, we may
enable this feature. It is default disabled.
ƒ
IAPP : To provide a better roaming capability for the stations among APs nearby the OWL800, we can enable
this item. Its default disabled.