3D Systems sPro, User Manual

Page: 73 / 280

SLS p r o c e s s
u s e r ’ s g u i d e
B U I L D P A R T S
This section covers the tasks involved in building parts. Many of the procedures in this section
are summaries of more detailed instructions in your Sinter application online Help.
Before you build parts , you must perform the procedures described in Prepare to Build
starting on page 55. These procedures include setting up a build packet, cleaning and starting
the equipment. loading powder, and preheating/docking the RCM.
`
Running Sinter . . . . . . . . . . . . . . . . . . . . . . . . . 74
`
Loading the RCM . . . . . . . . . . . . . . . . . . . . . . . 75
`
Homing the Part Piston and Roller . . . . . . 76
`
Messages in the Sinter Application . . . . . . 77
`
Selecting the Display Language . . . . . . . . 78
`
Adding & Leveling Powder . . . . . . . . . . . . . 79
`
Running a Build . . . . . . . . . . . . . . . . . . . . . . . . 81
`
Restarting a Terminated Build . . . . . . . . . . 82
`
Viewing a Build In Progress . . . . . . . . . . . . . 83
`
Changing Heater Setpoints In-Build . . . . . 84
`
Calibrating the IR Sensor . . . . . . . . . . . . . . . . 85
`
Pausing a Build . . . . . . . . . . . . . . . . . . . . . . . . . 86
`
Modifying a Build in Progress . . . . . . . . . . . 87
`
When a Build Ends . . . . . . . . . . . . . . . . . . . . . 89